TOTAL CONTROL
To perfectly reproduce even old recordings, the preamplifier can be set into Mono as well as Stereo mode. It also allows to swap the Left & Right channels to enable the reproduction of inverted recordings in addition to the absolute phase swap from 0° to 180°.
The P-1000 MkII Booster technology enhances the unit to get the best out of speakers that require power supplies. It provides greater energy in a very specific range of low frequencies. The Booster is completely by-passed when set to OFF.
The P-1000 MkII is easy to control with its large colour display showing all functions. All the settings can be found on the screen allowing quick and precise fine adjustments, whether using the Single-Knob-Control rotary joggle conveniently placed on the front panel or the elegant IR remote control.
To enhance the performance of the P-1000 MkII even further, it can be optionally matched with the external super inductive power supply PSU-1250/1000 and the valve output stage TUBE-1012/1006.
FREQUENCY RESPONSE
2Hz – 200KHz @ ± 3dB
THD (TOTAL HARMONIC DISTORTION)
<0.001% @ 1kHz
GAIN
+19dB
SIGNAL TO NOISE RATIO
-120dB
CHANNEL SEPARATION
>118dB
CHANNEL LEFT/RIGHT
Selectable swap
BOOSTER
3 adjustable levels (by-passable/off)
MONO/STEREO
Yes
ABSOLUTE PHASE
0°/180° selectable
BOOSTER
3 adjustable levels (by-passable/off)
VOLUME
100 steps
REMOTE CONTROL
Included
IR receiver on front and back
ANALOGUE INPUTS
4x Stereo RCA
4x Stereo XLR balanced
INPUT LEVEL
Typical 2Vrms – Max up to 5Vrms on RCA
Typical 2Vrms – Max up to 10Vrms on XLR
INPUT IMPEDANCE
100kΩ XLR & RCA
AUDIO OUTPUTS
2x Stereo RCA unbalanced
2x Stereo XLR balanced
1x dedicated to TUBE-1006 & TUBE-1012
OUTPUT LEVEL
Max up to 20Vrms on XLR & 10Vrms on RCA
OUTPUT IMPEDANCE
<50Ω XLR & RCA