Ex Display pair of GoldenEar Triton 3+ Powered Loudspeakers.
Supplied in very good condition, with all the original box, packaging and instructions.
Due to the size and weight of these speakers, they are listed for collection only from our Watford store. If you would like them shipped, please call 0208 930 9933 for a shipping quote.
The Triton Three+ incorporates the same advanced technologies and delivers state-of-the-art performance remarkably similar to its bigger brothers. The Triton Three+ is literally a smaller version of the award-winning Triton One and Triton Two+. It is the perfect solution for listeners looking for a more compact loudspeaker that offers equally superb performance for both high-quality two-channel systems as well as in multi-channel home theater and music systems.
Like the Triton Two+, the Triton Three+ incorporates technologies developed for the Triton One. Its built-in powered subwoofer (a technology first pioneered by GoldenEar principals Sandy Gross and Don Givogue) includes an integral 800 watt GoldenEar ForceField digital/DSP controlled power amp driving an active front-mounted long-throw 5″ x 9″ quadratic subwoofer driver. This is coupled to two opposing, inertially balanced 6-3/4″ x 8″ Quadratic Planar Back-Wave-Driven Radiators which are located on the sides, near the floor, in order to take full advantage of boundary coupling. There is one of the same 4.5″ high-definition spider-leg, cast-basket MVPP™ drivers as used in the Triton Two+, along with the same GoldenEar signature High-Velocity Folded Ribbon AMT tweeter. Performance-wise, the Triton Three+ delivers the same boxless three-dimensional imaging as the bigger Tritons. Likewise, the powerful, deep subwoofer bass blends perfectly with the silky smooth, utterly transparent midrange and high frequencies, putting many dramatically more expensive speakers to shame.
| Driver Complement | One High-Velocity Folded Ribbon AMT Tweeter One 4.5" High-Definition Cast-Basket Multi-Vaned Phase Plug (MVPP) Upper-Bass/Mid Drivers One 5" x 9" Long-Throw Quadratic Subwoofer Bass Driver Two 6.8" x 8" Quadratic Planar Back-Wave-Driven Radiators |
| Passive Raditor Surface Area | 30.45in2 (196.49cm2) |
| Efficiency | 89dB 1W/1M @ 4Ω (2.83V/1M) |
| Frequency Response | 30Hz – 25kHz typical (-6dB on axis @ 30Hz, anechoic bass response) |
| Nominal Impedance | 4Ω |
| Recommended Amplification | 20 – 400Wpc |
| Built-In Subwoofer Power Amplification | 500W peak/250W RMS, DSP-Controlled (50-ohm load – 5 seconds sustained 55Hz sinusoidal signal) Note: Not tested to FTC standard (8-ohm load – 5 minutes sustained 1kHz sinusoidal signal) |
| Dimensions | Tower: 5.3" (13.3 cm) W (front) x 7" (17.8 cm) W (rear) x 12.9" (33 cm) D x 44" (111.8 cm) H (with base, no spikes)
Base: 11.5" (29.2 cm) W x 16.2" (41.3 cm) D |
| Weight | Product: 45 lbs (20.4 kg) / Shipping: 53 lbs (24 kg) |
