The Canamp is a two-stage amplifier. While the first – voltage gain – stage is based on an integrated circuit of the highest audio pedigree, the second – power gain – stage is a single-ended, pure Class-A amplifier. It enables the Canamp to drive virtually any headphones from about 30 ohms up to 600 ohms or more. The signal path is kept to a minimum on its PCB, offering a clean and noise-free sound.
The CanAmp not only has a line-level input but offers a line-level output to boot; it can therefore be connected to the TAPE MONITOR output of an amplifier, leaving the TAPE output free for additional components. Gold-plated RCA terminals are used, and soldered directly onto the fiberglass PCB.
SPECIFICATIONS
Inputs: | 1x analogue |
Outputs: | 1x 6.35mm headphone / 1x line out |
Frequency response (+0, -1 dB): | 10 Hz – 50 kHz |
Input impedance: | 10 kΩ |
Power: | 300 mW (100 Ω) |
SNR: | > 85 dB |
Max. consumption: | 15 W |
Weight: | 1.2 kg |
Dimensions (W x H x D): | 9.5 x 7.5 x 25 cm |