Russell K Red 150

Russell K Speakers put music first

Be the first to review this product

Manufacturer: Russell K

Availability: In stock

Manufacturer part number: Russell K Red 150

Free shipping

Colour *

Oak/White
Walnut/Black
Black Oak/Black

Cloth Grilles

£6,950.00

Qty:

The Russell K Red 150 is the larger floorstanding speaker in the range and builds on the Red 100 platform. Like all Russell K speakers, you can listen for hours without fatigue and music is conveyed with soul, power and authenticity. They might not be a name you are familiar with but one you should definitely listen too.

Available in 3 colour combinations, Light Oak/White, Walnut/Black, Black Oak/Black and all made in the UK.

This floorstander sounds lively and naturaly, it has a perfect timing with a fast, rhythmic, full bass.

Cabinet

Dimensions H- 950mm (1000mm including plinth, base and spikes) W-240mm D-250mm
Construction 16mm MDF all sides apart from front baffle which is 19mm.
Totally undamped cabinet
3 acoustic loading bracing shelves with multiple apertures, mounted below the tweeter, below the bass mid driver and below the sub bass driver
1 bracing shelf mounted near the bottom of the enclosure containing an internal port
Internal port vents into a small chamber containing 2 asymmetric length reflex ports tuned as a system to 21Hz

Drive Units

2 x 6.5” Bass units with impregnated paper cone and curved optimised acoustic profile
High power Ferrite magnet driving a 25mm voice coil with aluminium former and Faraday distortion cancelling copper ring
25mm soft dome tweeter
Double Ferrite magnet system
Copper Clad Aluminium voice coil wire on a Fibreglass Former and Faraday distortion cancelling copper ring

Crossover

All drivers connected in positive phase
Sub bass driver starts roll off at 80Hz 6db/Oct fed by “Enclosed Field Iron Core Inductor”. Features high power without saturation, very low DCR and almost no stray magnetic field
Bass/Mid driver crossover frequency 2200Hz nominal 12 db/Oct. Utilises an “Enclosed Field Ferrite Core Inductor “in the signal path. Very low DCR nominal stray fields
Tweeter attenuation by misaligned Zobel network as opposed to conventional L-Pad
All Drivers have only one component in the signal path
Phase optimised through the crossover region
In room usable frequency response 20Hz-22KHz (dependent on room)
Sensitivity: 87db 1 watt 1 Metre

Products specifications

Attribute name	Attribute value
Item Condition	New

Russell K Red 150

Cabinet

Drive Units

Crossover

Gold Note A6 Evo II

PMC Twenty5.24i

Spendor D7.2

Russell K Red 120